VIP tents
For exclusive events we offer a large range of different VIP tents.
We newly developed the fixed glazing - the highlight of every VIP tent!
Of course we also offer many ideas for the interior decoration.
Sizes
Our VIP tents are available in 5m increments and with the following measurements:
| Span width tent | available side heights | ||
|---|---|---|---|
| 4m | 2,4m | 3,0 | 4,0m |
| 5m | 2,4m | 3,0m | 4,0m |
| 6m | 2,4m | 3,0m | 4,0m |
| 8m | 2,4m | 3,0m | 4,0m |
| 10m | 2,4m | 3,0m | 4,0m |
| 12m | 2,4m | 3,0m | 4,0m |
| 15m | 2,4m | 3,0m | 4,0m |
| 16m | 2,4m | 3,0m | 4,0m |
| 20m | 2,4m | 3,0m | 4,0m |
| 21m | 2,4m | 3,0m | 4,0m |
| 25m | - | 3,0m | 4,0m |
| 30m | - | 3,0m | 4,0m |
| 31m | - | 3,0m | 4,0m |
| 40m | - | 3,0m | 4,0m |
| 50m | - | - | 4,0m |
Due to the flexible expandable construction it is possible to extend or reduce the size of the tent at any time to the desired element width.
Intermediate sizes and other eave heights are possible.
Frame
Extruded anodised 4-groove keder profiles.
All steel parts, excluding tent pegs, are galvanized.
Of course our tents are able to resist storms of up to 130 km/h (certified according to DIN 4112).
Tarpaulin
The tarpaulins consist of high gloss PVC material coated on both sides (630 g/m2) which according to DIN 4102 B1 is flame-resistant, water-repellent and UV resistant.
The tarpaulin can be delivered in either a single colour, with stripes on one side or with your logo on it.
Accessories
There are unlimited possibilities to attach annexes to our tents:
Apse annexes, catering annexes as well as connections to other tents are no problem for the functional construction of our products.
Should you nevertheless face a seemingly "unsolvable“ challenge, we offer special designs and we will gladly give you all the advice and practical support you require.
The right furnishings and equipment for your VIP tent
To match your stylish event you should not be without beautiful decoration.
In addition to the basic equipment of our tents we offer plenty of accessories.
From windows made of poly glass to lighting and decorative ribbons in different colours to air-conditioning, Bühler Zelt- & Bühnensysteme offers not only a wide product range of tent systems but also its accessories.
The following equipment is available:
- Windows and doors
- Lighting
- Decoration
- Table and chairs
Floor
You can choose between:
Wooden flooring
This flooring for our tent systems consists of tongue and groove boards (21 mm thick).
The boards are screwed on with hard wood scantling. Due to an overhang of the hard wood scantling at the edge of the slab it is impossible to trip.
For the foundation of the floor two options are available:
- Squared timber foundation
The supporting structure consists of squared timbers laid parallel to the direction of the width of the tent. The planed tongue and groove boards lie on these squared timbers inserted into aluminium profiled rods. - Steel foundation
The supporting structure consists of an outer frame (rectangular tube) with a fixture for tent supports and two layers of square tubes, naturally galvanized.
The tongue and groove boards lie on this steel frame inserted in aluminium profiled rods.
This tent floor has the capacity to hold a load of 350 kg / m².
Coffered VIP flooring
It is not necessary to anchor the floor because it is usually sufficient to insert our heavy load slabs. As our platform elements can be integrated into the flooring system it allows you to be very flexible, save money and storage capacity. The coffered VIP flooring consists of coffered panels 1 x 3 m in size with water-resistant phenolic resin coated plywood surrounded by a special aluminium profile. The floor is supported by especially manufactured anchor plates as well as plate girders from galvanized steel.